General welding robot factory has the following disadvantages:
A) the human defects caused by improper operation mainly include damage of welding gun in welding robot factory and improper loading and unloading of workpieces, and no deformation of positioner follow-up.
B) the disadvantages of poor design and manufacture of peripheral equipment mainly include: problems of lifting way switch and cable, quality problems of some components flashed by teaching device.
C) improper environmental protection, if the humidity in the air is too high and the static electricity acts, the dust on the welding site is large, forming dust accumulation in the control cabinet and misoperation.
In the early stage of welding robot factory, if there are defects, the following methods are generally adopted: first, appoint the company's professional repair personnel to track the equipment; second, contact the manufacturer to carry out systematic training and learning for operators; third, establish perfect repair records and The shortcomings of the standard, the diagnostic criteria.
In the repair process of welding robot factory, the preliminary diagnosis of defects is decisive. The accuracy of diagnosis mainly depends on three elements: accurate statement of defect information at one time; theoretical discriminant analysis ability of defects; unit improvement.
Based on the defect repair information of welding robot factory, the reliability diagnosis is made. Some can be divided into welding machine, welding machine, welding machine, welding machine. Some defects can be detected by visual inspection, such as machine defects, rapid replacement of equipment fault lights, while digital signal defects such as bus communication defects, power system defects and industrial computer system defects, it is necessary to select test equipment.
This article comes from the customization of automatic welding equipment http://www.frankiejohn.com/
Methods to reduce welding deformation and control
I. causes and types of welding deformation causes of welding deformation: welding deformation refers to the deformation of weldments during and after welding. During welding, the molten metal and the base metal near the seam expand and produce plastic deformation. During solidification, the weld and the metal near the seam contract. This is the longitudinal stress and the transverse stress. Make the weld longitudinal and transverse shrinkage, so that the weldment deformation. Because the heat e
Specific differences between grinding machine and polishing machine
Difference: the workpiece processed by grinding machine is rough, and the surface finish of workpiece processed by polishing machine is better, but high finish can be achieved by installing precise grinding wheel on grinding machine. Grinding machine: electric grinder reciprocating electric polishing grinder (also known as file mill). It is widely used in the fine machining and surface polishing of the mold profession. It is a substitute for similar pneumatic products. The main outstanding featu
How to improve the efficiency of straight seam welding machine?
The straight seam welding machine is widely used in ordinary times, and our appeal to the seam welding machine is constantly strengthened. We should know about the operation of the seam welding machine. The straight seam welding machine is not only excellent in spot welding machine, but also excellent in seam welding machine. A good machine must be equipped with a good operator. It is not simple to be a good operator. In addition to the accumulation of time experience, it also needs many tips, s
How to deal with the failure of welding robot?
General welding robot factory has the following shortcomings: a) human shortcomings caused by improper operation, mainly including welding gun damage in welding robot factory, improper loading and unloading of workpieces, and no deformation of positioner follow-up. B) the disadvantages of poor design and manufacture of peripheral equipment mainly include: problems of lifting way switch and cable, quality problems of some components flashed by teaching device. C) improper environmental protection