Welding, also known as fusion and fusion welding, is a manufacturing process and technology for joining metals or other thermoplastic materials such as plastics by heating, high temperature or high pressure. So, when choosing welding materials, do you know which method to choose? Listen to Jiangmen welding processing editor.
Due to the characteristics of high temperature, high pressure and strong corrosion of some devices, the intergranular corrosion, stress corrosion, high-temperature oxidation and high-temperature creep properties of the joints are mainly considered in most dissimilar steel welded joints. The composition of the fusion zone in the welded joints is required to be stable and the transition layer is not obvious. Therefore, the manual arc welding with small fusion ratio and easy operation can be used.
However, hydrogen corrosion should be considered for dissimilar steel joints under hydrogen condition, especially for dissimilar joints welded by low alloy steel (such as 16Mn steel) and austenitic steel (such as SUS304). By adopting TIG welding with high fusion ratio, the peeling crack of this kind of dissimilar joint can be prevented.
This article comes from the manual welding equipment of water tankhttp://www.frankiejohn.com
Methods to reduce welding deformation and control
I. causes and types of welding deformation causes of welding deformation: welding deformation refers to the deformation of weldments during and after welding. During welding, the molten metal and the base metal near the seam expand and produce plastic deformation. During solidification, the weld and the metal near the seam contract. This is the longitudinal stress and the transverse stress. Make the weld longitudinal and transverse shrinkage, so that the weldment deformation. Because the heat e
Specific differences between grinding machine and polishing machine
Difference: the workpiece processed by grinding machine is rough, and the surface finish of workpiece processed by polishing machine is better, but high finish can be achieved by installing precise grinding wheel on grinding machine. Grinding machine: electric grinder reciprocating electric polishing grinder (also known as file mill). It is widely used in the fine machining and surface polishing of the mold profession. It is a substitute for similar pneumatic products. The main outstanding featu
How to improve the efficiency of straight seam welding machine?
The straight seam welding machine is widely used in ordinary times, and our appeal to the seam welding machine is constantly strengthened. We should know about the operation of the seam welding machine. The straight seam welding machine is not only excellent in spot welding machine, but also excellent in seam welding machine. A good machine must be equipped with a good operator. It is not simple to be a good operator. In addition to the accumulation of time experience, it also needs many tips, s
How to deal with the failure of welding robot?
General welding robot factory has the following shortcomings: a) human shortcomings caused by improper operation, mainly including welding gun damage in welding robot factory, improper loading and unloading of workpieces, and no deformation of positioner follow-up. B) the disadvantages of poor design and manufacture of peripheral equipment mainly include: problems of lifting way switch and cable, quality problems of some components flashed by teaching device. C) improper environmental protection